1485G-P1M5-C ，，1485G-P1M5-C

1485G-P1M5-C
1485G-P1M5-C
1485G-P1M5-C





确定PID参数时要兼顾系统灵敏性和稳定性，由于我们恒压控制要求和设备的性能条件，参数设定更强调稳定性（及KI），由于微分环节有放大噪声的特点，我们将KD尽量设置得较小；SWM为PID指令转为手动直接调频的开关，SO设定为PID指令的在手动控制输出方式时的输出值，当变频器从PID自控调节转为手动直接调频时，SO替代PID运算结果作为转换时的输出值，将SO设定为控制值就可实现无缝转换，减小变频器运行频率的震荡。DB为PID指令的死区设定值，输出超出死区时PID指令通过自动运算限制输出超出限定范围。

POWEREX ,POW-R-BLOK, ED431225NA

APPLETON 1-1/2" GRAYLOY FM7 CONDUIT BODY TB57

IFM EFFECTOR 20-250V PHOTOELECTRIC SENSOR OG0030

ASCO RED-HAT 24VDC 11.6W 5-125 PSI 3/4" NPT SOLENOID

FUJI ELECTRIC 24VDC COIL 20A CONTACTOR SJ-1SG/UL(18)

IFM ELECTRONIC 18-30VDC 5-100 PSI RANGE 1/4" NPT PRESS

PILZ E-STOP, PUSHBUTTON, & SAFETY GATE RELAY PNOZ X8P

YASKAWA ELECTRIC RESISTOR UNIT JUSP-RA05

MAC VAC-120PSI, 24VDC, 5.4W, 1/8"NPT, SOLENOID VALVE

SMC DeviceNet 0.005-0.5MPs E/P REGULATOR ITV2030-40N3CS

ABB 277VAC 4A SINGLE-POLE CONTACTOR VDE 0660 S271-K4 N

ALLEN BRADLEY 1771-HT3 ESTOP I/O TERMINATION PANEL LOT

BRYANT CONTROL INC. ED15 115 VAC 50/60 HERTZ BOWL-HOPPE

ADVANCE 120V, 0.71 AMPS INSTANT START ELECTRONIC BALLAS

FUJI ELECTRIC BU-FHB3020 CIRCUIT BREAKER WITH KNOB AND

FUJI ELECTRIC 3A 2-POLE CIRCUIT BREAKER CP32FM/3W

T.P.C WIRE & CABLE 4-POLE, 6FT QUICK-CONNECT CABLE 8440

CROUZET SYRELEC LUFR2 230 VOLTS 3 PHASE TIMER RELAY

ALTECH ABLSURSUM SINGLE-POLE 5A CIRCUIT BREAKER V-EA

GENERAL ELECTRIC 2.0KVA, 60Hz, 240/480V, DRY TYPE TRANS